Monday, 22 October 2018

Learn Some of the Roofing lingo

Here are some terms to help you learn the roofing lingo…

Whether you’re building a new home and want a professional to install the roof or you already own a home and you’re needing a new roof installation due to damage or age, Beneficial Roofing has you covered. We install all kinds of roofs for residential and commercial buildings.

Ever wonder what’s going on when the “roofing guys” are on your roof? Read on for a brief version of what’s happening up there.

A discussion of roofing comes with its own vocabulary. Below are some of the most common terms and their definitions. (Definitions from: here, here, and here)

  1. Deck: The surface installed over the supporting framing members to which the roofing is applied.
  2. Eaves: The horizontal, lowest edge of a sloped roof that extends beyond the exterior wall.
  3. Rakes– The vertical edges of gable-style roof planes.
  4. Flashing- Pieces of metal or roll roofing used to prevent seepage of water into a building around any intersection or projection in a roof such as vent pipes, chimneys, adjoining walls, dormers, and valleys.
  5. Step flashing: Flashing application method used where a vertical surface meets a sloping roof plane. Individual pieces extend on the roof plane and up the vertical surface and are overlapped and stepped up the roof as shingles are applied.
  6. Drip Edge: A non-corrosive metal lip that keeps shingles up off the deck at roof edges and extends shingles out over eaves and rakes
  7. Underlayment: A layer of asphalt-saturated felt (sometimes referred to as tar paper) which is laid down on a bare deck before shingles are installed to provide additional protection for the deck.
  8. Valley: The internal angle formed by the intersection of two sloping roof planes to provide water runoff.
  9. Ice dam: Condition formed at the lower roof edge by the thawing and refreezing of melted snow on the overhang. Can force water up and under shingles, causing leaks.
  10. Ice-and-water shield: Thin, self-adhering rubberized asphalt membrane applied before underlayment, but over the drip edge at the eaves to help mitigate potential leaks from ice dams
  11. Ridge: The uppermost, horizontal external angle formed by the intersection of two sloping roof planes.
  12. Sheathing: Exterior-grade boards used as a roof deck material.

 

Upon the rooftop…

So, now that we know a little bit of the roofer’s lingo, let’s see just what they do up on your roof.

  1. Preparation
    1. The old shingles and flashings will be removed.
    2. The decking will be swept as clean as possible. Loose sheathing will be reattached, and sheathing will be inspected for damage prior to new shingles being placed.
  2. Barrier placement
    1. Drip edge installed at the eaves
    2. Ice-and-water membrane applied over the drip edge at the eaves
    3. Metal flashing and ice-and-water membrane applied in the valleys as well as any protrusions (plumbing stacks and attic vents, for example) from the roof
    4. Ice-and-water membrane applied to the rakes
    5. Felt underlayment is applied to the whole roof, each strip overlapping the previous layer by several inches
    6. The drip edge applied to the rakes, OVER the ice-and-water membrane and underlayment
  3. Shingle placement and finishing
    1. Starter shingles placed along the eaves extending past the fascia, drip edge, ice-and-water barrier, and underlayment
    2. Shingles applied in overlapping rows from eaves to ridge
    3. Metal step flashing applied with shingles at joints where the roof meets a wall or chimney.
    4. Roofers finish roof using specially-made pieces for capping the ridge.
    5. Roofers make a final pass across the entire roof, ensuring every nail is sealed with a professional strength sealant.

Congratulations! Your New Roof Rocks!

Thankfully, you won’t need a new roof very often. But, when age or weather damage keeps your roof from doing its job and threatens further damage to your home and belongings, we’re here to help. Beneficial Roofing offers a free consultation and award-winning professional roofing and customer service. With special pricing and financing available, we help you work with your homeowner’s insurance to make sure you get what you need at the price you can afford. Give us a call today! We’ve got you covered.

 

 

 

 

The post Learn Some of the Roofing lingo appeared first on Beneficial Roofing | VOTED BEST Roofing Company, Call Us Today & See Why!.



source https://beneficialroofing.com/learn-some-of-the-roofing-lingo/

Friday, 12 October 2018

Animals: 5 Steps to Keep Them from Living in Your Roof

Efficient Procedure for Controlling Critters from living in your roof

animal memeEveryone including animals deserves a good place to stay during the winter season. Even small animals such as rodents, bats, birds, and squirrels search for shelter during unfavorable weather conditions. Your upper roof could be the shelter they want to use.

However, these small creatures could end up bringing the unbelievable quantity of damage on the insulators, trim, wirings and ductwork. To make the matter worse, they can as well spread dangerous infections to your family. The following steps are efficient ways to eliminate and to prevent these critters away from your premises.

Step 1. Trim the Trees to Keep Animals Away

To prevent these small animals into the house, trim the trees closest to your house. The tree branches that head to your roof will make a pathway for these small living creature.

Step 2. Keep food unreachable

Food sources such as garbage bind and pet’s dishes can attract animals nearby. Therefore, you should try and keep them all inaccessible by covering or blocking the food.

Step 3. Set a trap

To prevent the rodents or whichever small animals that are causing damages and also spreading diseases, set up traps particularly at the place where they often were seen.

animals: squirrel in roof Step 4. Renovate the gaps in your roof

Find those small holes and do several patchworks because even the tiniest openings can invite those little creatures to develop nest inside.

Step 5. Schedule roofing inspections regularly

For certainty, to make sure for good condition of the vent pipes, chimneys, eaves, and soffits have Beneficial Roofing’s contractors come for checkups. They will seal spaces to keep those small animals away and to avoid pest infestation as well. Don’t allow your premises to become ground zero for nests during the winter. Go through these simple procedures to make you home no-go zone for these creatures, or you can call the experts from the Beneficial Roofing Company for complete surety.

Beneficial Roofing analysis is conducted by certified and experienced roof specialists. These services include roof surveying and roofing checkups on their condition. Additionally, the structure of your roof and weather resistance can be examined in detail. Through all those processes, they prepare a customized report about the current roof condition and its durability.

In short, they want to provide you with the complete information that you might need for caring for your roofing, hoping that you never have the similar problem again. Also, a roof survey offered for free. Beneficial Roofing has highly trained specialists that will survey your roof.

The post Animals: 5 Steps to Keep Them from Living in Your Roof appeared first on Beneficial Roofing | VOTED BEST Roofing Company, Call Us Today & See Why!.



source https://beneficialroofing.com/animals-in-roof/